init

i3blocks.conf

@@ -0,0 +1,177 @@
+# i3blocks config file
+#
+# Please see man i3blocks for a complete reference!
+# The man page is also hosted at http://vivien.github.io/i3blocks
+#
+# List of valid properties:
+#
+# align
+# color
+# command
+# full_text
+# instance
+# interval
+# label
+# min_width
+# name
+# separator
+# separator_block_width
+# short_text
+# signal
+# urgent
+
+# Global properties
+#
+# The top properties below are applied to every block, but can be overridden.
+# Each block command defaults to the script name to avoid boilerplate.
+command=/usr/share/i3blocks/$BLOCK_NAME
+separator_block_width=15
+markup=none
+
+#mediaplayer using playerctl
+[mediaplayer]
+instance=spotify
+interval=5
+signal=10
+
+
+#Shackspace
+#
+#Shows if shackspace is open using the shackspace api
+[Shack]
+command=sh shackspace.sh button=$BlOCK_BUTTON
+interval=300
+
+# Volume indicator
+#
+# The first parameter sets the step (and units to display)
+# The second parameter overrides the mixer selection
+# See the script for details.
+[volume]
+label=VOL
+label=♪
+instance=Master
+#instance=PCM
+interval=1
+signal=10
+
+# Memory usage
+#
+# The type defaults to "mem" if the instance is not specified.
+[memory]
+label=MEM
+separator=false
+interval=30
+
+#[memory]
+#label=SWAP
+#instance=swap
+#separator=false
+#interval=30
+
+# Disk usage
+#
+# The directory defaults to $HOME if the instance is not specified.
+# The script may be called with a optional argument to set the alert
+# (defaults to 10 for 10%).
+#[disk]
+#label=HOME
+#instance=/mnt/data
+#interval=30
+
+# Network interface monitoring
+#
+# If the instance is not specified, use the interface used for default route.
+# The address can be forced to IPv4 or IPv6 with -4 or -6 switches.
+[iface]
+#instance=wlan0
+color=#00FF00
+interval=10
+separator=false
+
+[wifi]
+#instance=wlp3s0
+interval=10
+separator=false
+
+[bandwidth]
+#instance=eth0
+interval=5
+
+# CPU usage
+#
+# The script may be called with -w and -c switches to specify thresholds,
+# see the script for details.
+[cpu_usage]
+label=CPU
+interval=10
+min_width=CPU: 100.00%
+#separator=false
+
+#[load_average]
+#interval=10
+
+# Battery indicator
+#
+# The battery instance defaults to 0.
+[battery]
+#label=BAT
+label=⚡
+instance=0
+interval=30
+
+# Date Time
+#
+#[time]
+#command=date '+%Y-%m-%d %H:%M:%S'
+#interval=5
+
+# Generic media player support
+#
+# This displays "ARTIST - SONG" if a music is playing.
+# Supported players are: spotify, vlc, audacious, xmms2, mplayer, and others.
+#[mediaplayer]
+#instance=spotify
+#interval=5
+#signal=10
+
+# OpenVPN support
+#
+# Support multiple VPN, with colors.
+[openvpn]
+interval=20
+
+[calendar]
+command=i3blocks/calendar
+label=
+interval=1
+
+[shutdown_menu]
+full_text=Quit
+command=./shutdown_menu; echo Quit
+
+
+# Temperature
+#
+# Support multiple chips, though lm-sensors.
+# The script may be called with -w and -c switches to specify thresholds,
+# see the script for details.
+#[temperature]
+#label=TEMP
+#interval=10
+
+# Key indicators
+#
+# Add the following bindings to i3 config file:
+#
+# bindsym --release Caps_Lock exec pkill -SIGRTMIN+11 i3blocks
+# bindsym --release Num_Lock  exec pkill -SIGRTMIN+11 i3blocks
+#[keyindicator]
+#instance=CAPS
+#interval=30
+#signal=11
+
+#[keyindicator]
+#instance=NUM
+#interval=30
+#signal=11

i3conf

@@ -0,0 +1,174 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod4
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:monospace 8
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# Before i3 v4.8, we used to recommend this one as the default:
+# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, its unicode glyph coverage is limited, the old
+# X core fonts rendering does not support right-to-left and this being a bitmap
+# font, it doesn’t scale on retina/hidpi displays.
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal
+bindsym $mod+Return exec i3-sensible-terminal
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym $mod+j focus left
+bindsym $mod+k focus down
+bindsym $mod+l focus up
+bindsym $mod+odiaeresis focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+j move left
+bindsym $mod+Shift+k move down
+bindsym $mod+Shift+l move up
+bindsym $mod+Shift+odiaeresis move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# switch to workspace
+bindsym $mod+1 workspace 1
+bindsym $mod+2 workspace 2
+bindsym $mod+3 workspace 3
+bindsym $mod+4 workspace 4
+bindsym $mod+5 workspace 5
+bindsym $mod+6 workspace 6
+bindsym $mod+7 workspace 7
+bindsym $mod+8 workspace 8
+bindsym $mod+9 workspace 9
+bindsym $mod+0 workspace 10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace 1
+bindsym $mod+Shift+2 move container to workspace 2
+bindsym $mod+Shift+3 move container to workspace 3
+bindsym $mod+Shift+4 move container to workspace 4
+bindsym $mod+Shift+5 move container to workspace 5
+bindsym $mod+Shift+6 move container to workspace 6
+bindsym $mod+Shift+7 move container to workspace 7
+bindsym $mod+Shift+8 move container to workspace 8
+bindsym $mod+Shift+9 move container to workspace 9
+bindsym $mod+Shift+0 move container to workspace 10
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+
+        # Pressing left will shrink the window’s width.
+        # Pressing right will grow the window’s width.
+        # Pressing up will shrink the window’s height.
+        # Pressing down will grow the window’s height.
+        bindsym j resize shrink width 10 px or 10 ppt
+        bindsym k resize grow height 10 px or 10 ppt
+        bindsym l resize shrink height 10 px or 10 ppt
+        bindsym odiaeresis resize grow width 10 px or 10 ppt
+
+        # same bindings, but for the arrow keys
+        bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+        status_command i3blocks
+}
+#display lock
+bindsym $mod+ctrl+l exec  ~/Dokumente/scripts/lock.sh 
+
+#display-visor for hotplug stuff
+exec --no-sartup-id display-visor -f -l
+
+#yad stuff for calendar in i3bar (i3blocks)
+for_window [class="Yad"] floating enable
+
+# Sreen brightness controls
+bindsym XF86MonBrightnessUp exec xbacklight -inc 10 # increase screen brightness
+bindsym XF86MonBrightnessDown exec xbacklight -dec 10 # decrease screen brightness
+
+#Pulse audio controls
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume 0 +5% #increase sound volume
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume 0 -5% #decrease sound volume
+bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute 0 toggle # mute sound
+bindsym PBTN exec sh ~/shutdownmenu.sh

mediaplayer

@@ -0,0 +1,81 @@
+#!/usr/bin/perl
+# Copyright (C) 2014 Tony Crisci <tony@dubstepdish.com>
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Requires playerctl binary to be in your path (except cmus)
+# See: https://github.com/acrisci/playerctl
+
+# Set instance=NAME in the i3blocks configuration to specify a music player
+# (playerctl will attempt to connect to org.mpris.MediaPlayer2.[NAME] on your
+# DBus session).
+
+use Env qw(BLOCK_INSTANCE);
+
+my @metadata = ();
+my $player_arg = "";
+
+if ($BLOCK_INSTANCE) {
+    $player_arg = "--player='$BLOCK_INSTANCE'";
+}
+
+if ($ENV{'BLOCK_BUTTON'} == 1) {
+    system("playerctl $player_arg previous");
+} elsif ($ENV{'BLOCK_BUTTON'} == 2) {
+    system("playerctl $player_arg play-pause");
+} elsif ($ENV{'BLOCK_BUTTON'} == 3) {
+    system("playerctl $player_arg next");
+}
+
+if ($player_arg eq '' or $player_arg =~ /cmus$/) {
+    # try cmus first
+    my @cmus = split /^/, qx(cmus-remote -Q);
+    if ($? == 0) {
+        foreach my $line (@cmus) {
+            my @data = split /\s/, $line;
+            if (shift @data eq 'tag') {
+                my $key = shift @data;
+                my $value = join ' ', @data;
+		
+                	@metadata[0] = $value if $key eq 'artist';
+                	@metadata[1] = $value if $key eq 'title';
+            }
+        }
+
+        if (@metadata) {
+            # metadata found so we are done
+            print(join ' - ', @metadata);
+            exit 0;
+        }
+    }
+
+    # if cmus was given, we are done
+    exit 0 unless $player_arg eq '';
+}
+
+
+my $xx = `playerctl -l 2>&1`;
+if($xx eq 'No players were found'){
+	exit(0);
+}
+my $artist = qx(playerctl $player_arg metadata artist);
+# exit status will be nonzero when playerctl cannot find your player
+exit(0) if $?;
+push(@metadata, $artist) if $artist;
+
+my $title = qx(playerctl $player_arg metadata title);
+exit(0) if $?;
+push(@metadata, $title) if $title;
+
+print(join(" - ", @metadata)) if @metadata && @metadata ne NULL;